Hitachi Koki >> Product >> CS150NX
  •  
  • TABLETOP MICRO ULTRACENTRIFUGE

The world's fastest speed:150,000rpm
The world's greatest RCF:1,050,000xg

himac centrifuge technologies have realized the above greatest performance and the guietest operating sound "45dBA 2 in its the most compact body *.
CS150NX takes only 90 seconds to reach the world' s fastest speed 150,000rpm by himac original vacuumed drive unit. Now you can separate and purify protein, lipoprotein, cell organelle, DND and RNA, also carbon nano tubes, more efficiently than ever.

* versus other similar ultracentrifuge in this class, as of Oct 2008

Features

The Most Compact Body

    • The most compact body * (590(W) x 582(D) x 408(H) mm) does not occupy laboratory table. CS150NX carries the world greatest performance and many attractive and useful functions in its the most compact body *. Rotor chamber is allocated in a front part of the body with smooth sliding door, so that it is easy for operators to place a rotor. Touch-sensitive LCD panel with wide view angle is placed at a position and an angle for easy operation.PWM (pulse width modulation) motor control has realized substantial reduction in acceleration and deceleration time.
  • The Most Compact Body

Powerful Imbalance Protection

    • Samples need to be balanced within 5mm by visual check only. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.
  • Powerful Imbalance Protection

Easy Operation with Touch-Sensitive LCD

  • Samples need to be balanced within 5mm by visual check only. Non-contact imbalance sensor always monitors vibration of the rotor and drive shaft. In case of abnormal vibration, the sensor activates and stops operation immediately.
    Easy Operation with Touch-Sensitive LCD

Quiet Operating Sound "45dBA"

  • This unusually quiet operating sound was realized by newly develope rigid-cotrol drive system and sound absorbing structure design. It does not disturb your researching works in the laboratory.

Quick Start-Up

    • It takes just 8 seconds(minimum) to be ready for operation since power switch is turn on. Initial screen is displayed on the LCD panel during booting up the system.
  • Quick Start-Up

Powerful Vacuum Pump

  • Reaching time to high-vacuum status is reduced to half by optimized control of the oil diffusion pump. (comparing with our previous model.)

Easy Timer Setting

  • himac original RTC (real-time control) function makes timer setting easy. What you need to do is simply set start time or finish time with running time. It is easier than conventional delay time setting timer.

Acurate Control of Net Run-Time

  • The timer starts when the set speed is atteined by himac original actual run timer function (PAT.). It helps to precisely control of the net run-time and obtain high-reproducibility separation. Of course, conventional run timer is selelctable.

USB Interface (compatible to GLP/GMP)

  • USB port is equipped as standard specificiation. Operating data can be output in CSV format. LAN port is also selectable. (option)

RCF Calculation and Display

  • CS150NX eliminates many troublesome and time-consuming manual calculation. Also, you can start operation by entering g value, instead of running speed.

Specifications

Specifications
Model CS150NX
Maximum Speed (rpm) 150,000
Maximum RCF (x g) 1,050,000 (S140AT rotor)
Speed Control Accuracy (rpm) +/-50 (5,000 - 150,000)
Maximum Tube Capacity 30ml x 6 tubes (S50A rotor)
Maximum Tube Capacity
(Swing Rotor)		 7ml x 4 tubes (S50ST rotor)
Timer 1 min. to 99 hrs. and 59 min.
with HOLD function, with RTC function
Rotor Temp. Control Range 0 - 40 degree C (1 degree increments)
Rotor Cooling Method Thermo-module cooling system (HCF free)
Rotor Setting Method Self - Locking System
Screen Display Colour LCD (touch-sensitive)
Operational Noise (dBA) 45 (1m front)
Heat Radiation Rate (kw) 0.7
Drive Unit Warranty 5 years
Dimensions (mm) 590 (W) x 582 (D) x 408 (H)
Footprint (m2) 0.50 (850 x 590)
Weight (kg) 97
Power Requirements AC220V, 230V, 240V +/-10% (50/60Hz)
Single phase, 8A (Maximum)
Standard Accessories Tool box and tool set, Instruction manual
Standard IEC61010-2-020, EN61326, CE Marking qualified
Catalog

Rotors for CS150NX

Self - Locking Rotor System

    • himac original "self - locking rotor system" is the most simple system to place the rotor onto the drive shaft. You just simply place the rotor on the drive shaft and that's all. The rotor is locked by centrifugal force automatically. You do not need to fix the rotor by screw or push the button to lock or unlock the rotor like other models available in the markets.
  • Self - Locking Rotor System

Rotors

S110AT

  • S110AT
  • Comparing with S100AT6, Max. RCF is improved, in spite of the same nominal capacity. Separation time is reduceed 17% over S100AT6 under the same condition. Screw cap type microtube can be centrifuged at 581,000xg with adaptor (option).

    • Max. speed
    • 110,000 (rpm)
    • Max. RCF
    • 691,000
    • K-factor
    • 15
    • Standard tube capacity
    • 4.0 x 8 (ml x tubes) * 1
    • Max. tube capacity
    • 5.0 x 8 (ml x tubes)
    • Part No.
    • 9024411K

S50A

  • S50A
  • Maximum nominal capacity is 30ml x 6 tubes, it is one of the largest volume rotor for micro ultracentrifuge. Also it is easy to open and close the cover by T-shape handle. Newly introduced 30ml tubes series and himac original S-cap can be used for S50A.

    • Max. speed
    • 50,000 (rpm)
    • Max. RCF
    • 210,000
    • K-factor
    • 61
    • Standard tube capacity
    • 25.0 x 6 (ml x tubes) * 1
    • Max. tube capacity
    • 30.0 x 6 (ml x tubes)
    • Part No.
    • 9024391K

S50ST

  • S50ST
  • Top loading of swing bucket prevents from wrong setting the bucket. Maximum nominal capacity is 7ml x 4 tubes, it is one of the largest volume rotor for micro ultracentrifuge. New 7ml tubes series are also introduced.



    • Max. speed
    • 50,000 (rpm)
    • Max. RCF
    • 253,000
    • K-factor
    • 77
    • Standard tube capacity
    • 7.0 x 4 (ml x tubes) * 1
    • Max. tube capacity
    • 7.0 x 4 (ml x tubes)
    • Part No.
    • 9024401K

Rotors

Standard Rotors

Standard Rotors
Type Model
(Part No.)		 Max. speed
(rpm)		 Max. RCF
(x g)		 K-factor Stadard tube capacity * 1
(Max. tube capacity)
(ml x tubes)
Fixed angle S150AT
(9024211K)		 150,000 901,000 6 1.0 x 8
(2.0 x 8) * 2
S140AT
(9024351K)		 140,000 1,050,000 5 1.0 x 10
(2.0 x 10) * 2
S120AT2
(9024181K)		 120,000 650,000 8 1.0 x 10
(2.0 x 10) * 2
S110AT
(9024411K)		 110,000 691,000 15 4.0 x 8
(5.0 x 8) * 2
S100AT3
(9024231K)		 100,000 436,000 7 0.23 x 20
(0.23 x 20)
S100AT4
(9024241K)		 100,000 541,000 16 3.0 x 6
(4.0 x 6) * 2
S80AT3
(9024331K)		 80,000 415,000 23 6.0 x 8
(8.0 x 8) * 2
S58A
(9024381K)		 58,000 289,000 50 10.0 x 8
(13.5 x 8) * 2
S55A2
(9024371K)		 55,000 201,000 40 1.5 x 12
(1.5 x 12) * 4
S50A
(9024391K)		 50,000 210,000 61 25.0 x 6
(30.0 x 6)
Neo angle S140NT
(9024223K)		 140,000 752,000 6 2.0 x 8
(2.0 x 8) * 3
Swinging bucket S55S
(9024281K)		 55,000 259,000 44 2.2 x 4
(2.2 x 4)
S52ST
(9024341K)		 52,000 276,000 79 5.0 x 4
(5.0 x 4)
S50ST
(9024401K)		 50,000 253,000 77 7.0 x 4
(7.0 x 4) * 1

Made to Order

Made to Order
Type Model
(Part No.)		 Max. speed
(rpm)		 Max. RCF
(x g)		 K-factor Stadard tube capacity * 1
(Max. tube capacity)
(ml x tubes)
Fixed angle S120AT3
(9024191K)		 120,000 650,000 8 0.5 x 14
(0.5 x 14)
S80AT2
(9024251K)		 80,000 358,000 14 0.5 x 20
(0.5 x 30)
304,000 17 0.5 x 10
(0.5 x 30)
S70AT
(9024261K)		 70,000 307,000 31 0.5 x 20
(0.5 x 20)
Neo angle S120NT
(9024303K)		 120,000 586,000 9 2.0 x 8
(2.0 x 8) * 3
S100NT
(9024313K)		 100,000 479,000 12 4.0 x 8
(4.0 x 8) * 3
Vertical S120VT
(9024291K)		 120,000 501,000 8 2.0 x 8
(2.0 x 8) * 3
    Notes:
  • Nominal capacity of standard tube supplied with the rotor
  • Capacity indicated is when using a seal tube. Please place a separate order for STF-2 tube sealer, tube rack and space cap.
  • Space cap is standard accessory
  • Third-party 1.5 ml microtubes cannot be used.
© Hitachi Centrifuges. 2013. All rights reserved.